Order
Search
Register
Register
For whole boxes we recommend you order pcs

All categories

New Created with Sketch. New products campaign Created with Sketch. Campaign Sale Created with Sketch. Clearance sale
Audio-Technica

Skivspelare Direktdriven Manuell Silver

Article no:
AT-LP120XUSBSV
MPN
AT-LP120XUSBSV
RSP: 4 495,00 kr
Show all products of Audio-Technica
  • Specification
    Package Dimensions (LxWxH)
    0.563 x 0.266 x 0.463 m
    Gross Weight
    10.144 kg
  • Description
    Article no: AT-LP120XUSBSV
    MPN AT-LP120XUSBSV
    EAN: : 4961310148782

    The AT-LP120XUSB is a fully manual turntable that can play 33-1/3, 45 and 78 rpm records

    It is also equipped with a USB output, which makes it possible to connect the turntable to your computer.

    The built-in RIAA amplifier gives you the choice between PHONO and LINE
    PHONO is used if your amplifier has a PHONO input and the LINE mode should be used on devices where extra amplification of the signal is needed, such as active speakers or amplifiers with AUX input.

    The AT-LP120XUSB has a new direct-drive DC servo motor, which provides a more precise and consistent speed. Together with a dynamic, adjustable anti-skate control, S-shaped tonearm and the new AT-VM95E cartridge, you have the best conditions for a good sound reproduction.

    The tonearm is S-shaped with adjustable tracking force together with the new tonearm shell AT-HS6 and the new AT-VM95E cartridge. Audio-Technica has been a market leader in developing Phono cartridges for the past 50 years and it is noticeable in their latest high-performance AT-VM95E (elliptical stylus). The cartridge is compatible with all the replacement needles included in the AT-VM95 series, allowing for easy upgrading. Additional features include a cast aluminum plate with felt mat.

    - Experience the latest generation AT-LP120XUSB, designed in Tokyo, Japan
    - Direct drive, DC servo motor
    - Fully manual
    - Adjustable and dynamic anti-skating control
    - Choose between three speeds, 33/45/78 RPM
    - Convert vinyl records to digital files via the USB output
    - Professional anti-resonance through the cast aluminum platter
    - New tonearm shell AT-HS6 together with the new phono cartridge AT-VM95E
    - The built-in amplifier is switchable between PHONO and LINE
    - The AT-VM95E is compatible with all replacement needles from the AT-VM95 series for easy and convenient upgrade or replacement
    - A balanced S-shaped tonearm with hydraulic damping lift
    - Stroboscopic platter with speed indicators
    - Record your vinyl records to your computer using Audacity (or other similar software) recording software
    - Included accessories: detachable RCA output cable, 45 rpm adapter and detachable dust cover 

    Specifications
    Turntable specifications:
    Type: Fully automatic 3-speed turntable
    Motor: DC servo motor
    Drive method: Direct drive
    Speeds: 33-1/3 rpm, 45 rpm, 78 rpm
    Turntable platter: Die-cast aluminum
    Starting torque: >1.0 kgf.cm
    Braking system: Electronic brake
    Wave: <0.2% WRMS (33 rpm) at 3 kHz
    Signal-to-noise ratio: >50 dB
    Output levels
    "PHONO": 4 mV nominal at 1 kHz, 5 cm/sec
    "LINE (MM)": 240 mV nominal at 1 kHz, 5 cm/sec
    Phono Gain 3: 36 dB nominal, RIAA equalized

    Tone Arm Specifications:
    Type: Static Balanced S-Shaped Tone Arm
    Effective Length: 230.5 mm
    Overhang: 16 mm
    Maximum Track Error Angle: Less than 3°
    Needle Pressure Adjustment Range: 0 to 4 g
    Suitable Pickup Weight Range: 3.5 to 8.5 g

    Pickup and Tone Arm Shell Specifications:
    Pickup Model: AT-VM95E
    Pickup Type: VM
    Recommended Load Impedance: 47,000 Ohm
    Output voltage: 4.0 mV (1 kHz, 5 cm/sec)
    Stylus: 0.3 × 0.7 mils bonded elliptical stylus
    Stylus tube: Aluminum tube
    Stylus pressure range: 1.8 to 2.2 g (standard: 2.0 g)
    Pickup weight: 6.1 g
    Tone arm shell model: AT-HS6
    Tone arm shell weight: 9 g (incl. lead wires)
    Tone arm shell overhang adjustment: ±5 mm

    USB function:
    A/D, D/A: 16 bits 44.1 kHz or 48 kHz USB selectable
    Computer interface: USB 1.1 Compatible with Windows 7 or later, or Mac OS X or later

    General specifications:
    Power supply requirements: 100 to 240 V, 50/60 Hz, max. 1.5 A.
    Power consumption: 2.70 W
    AC adapter: 12 V, 3 A
    Dimensions: 452.0 mm × 352.0 mm × 141.6 mm (W x D x H)
    Weight: 8 kg (without dust cover)
    Accessories: Dust cover, felt mat, turntable, counterweight, tonearm shell (AT-HS6), VM stereo pickup (AT-VM95E), 45 rpm adapter, stylus light, dust cover hinge, USB cable, (1.9 m), RCA audio cable (approx. 1.4 m), AC adapter (approx. 1.3 m) (AD-SA1230WD)
    Replacement stylus: AT-VMN95E (sold separately) separately)
    Replacement tonearm shell: AT-HS6 (sold separately)

    Specifications are subject to change without notice due to improvements.

    The AT-LP120XUSB is a fully manual turntable that can play 33-1/3, 45 and 78 rpm records

    It is also equipped with a USB output, which makes it possible to connect the turntable to your computer.

    The built-in RIAA amplifier gives you the choice between PHONO and LINE
    PHONO is used if your amplifier has a PHONO input and the LINE mode should be used on devices where extra amplification of the signal is needed, such as active speakers or amplifiers with AUX input.

    The AT-LP120XUSB has a new direct-drive DC servo motor, which provides a more precise and consistent speed. Together with a dynamic, adjustable anti-skate control, S-shaped tonearm and the new AT-VM95E cartridge, you have the best conditions for a good sound reproduction.

    The tonearm is S-shaped with adjustable tracking force together with the new tonearm shell AT-HS6 and the new AT-VM95E cartridge. Audio-Technica has been a market leader in developing Phono cartridges for the past 50 years and it is noticeable in their latest high-performance AT-VM95E (elliptical stylus). The cartridge is compatible with all the replacement needles included in the AT-VM95 series, allowing for easy upgrading. Additional features include a cast aluminum plate with felt mat.

    - Experience the latest generation AT-LP120XUSB, designed in Tokyo, Japan
    - Direct drive, DC servo motor
    - Fully manual
    - Adjustable and dynamic anti-skating control
    - Choose between three speeds, 33/45/78 RPM
    - Convert vinyl records to digital files via the USB output
    - Professional anti-resonance through the cast aluminum platter
    - New tonearm shell AT-HS6 together with the new phono cartridge AT-VM95E
    - The built-in amplifier is switchable between PHONO and LINE
    - The AT-VM95E is compatible with all replacement needles from the AT-VM95 series for easy and convenient upgrade or replacement
    - A balanced S-shaped tonearm with hydraulic damping lift
    - Stroboscopic platter with speed indicators
    - Record your vinyl records to your computer using Audacity (or other similar software) recording software
    - Included accessories: detachable RCA output cable, 45 rpm adapter and detachable dust cover 

    Specifications
    Turntable specifications:
    Type: Fully automatic 3-speed turntable
    Motor: DC servo motor
    Drive method: Direct drive
    Speeds: 33-1/3 rpm, 45 rpm, 78 rpm
    Turntable platter: Die-cast aluminum
    Starting torque: >1.0 kgf.cm
    Braking system: Electronic brake
    Wave: <0.2% WRMS (33 rpm) at 3 kHz
    Signal-to-noise ratio: >50 dB
    Output levels
    "PHONO": 4 mV nominal at 1 kHz, 5 cm/sec
    "LINE (MM)": 240 mV nominal at 1 kHz, 5 cm/sec
    Phono Gain 3: 36 dB nominal, RIAA equalized

    Tone Arm Specifications:
    Type: Static Balanced S-Shaped Tone Arm
    Effective Length: 230.5 mm
    Overhang: 16 mm
    Maximum Track Error Angle: Less than 3°
    Needle Pressure Adjustment Range: 0 to 4 g
    Suitable Pickup Weight Range: 3.5 to 8.5 g

    Pickup and Tone Arm Shell Specifications:
    Pickup Model: AT-VM95E
    Pickup Type: VM
    Recommended Load Impedance: 47,000 Ohm
    Output voltage: 4.0 mV (1 kHz, 5 cm/sec)
    Stylus: 0.3 × 0.7 mils bonded elliptical stylus
    Stylus tube: Aluminum tube
    Stylus pressure range: 1.8 to 2.2 g (standard: 2.0 g)
    Pickup weight: 6.1 g
    Tone arm shell model: AT-HS6
    Tone arm shell weight: 9 g (incl. lead wires)
    Tone arm shell overhang adjustment: ±5 mm

    USB function:
    A/D, D/A: 16 bits 44.1 kHz or 48 kHz USB selectable
    Computer interface: USB 1.1 Compatible with Windows 7 or later, or Mac OS X or later

    General specifications:
    Power supply requirements: 100 to 240 V, 50/60 Hz, max. 1.5 A.
    Power consumption: 2.70 W
    AC adapter: 12 V, 3 A
    Dimensions: 452.0 mm × 352.0 mm × 141.6 mm (W x D x H)
    Weight: 8 kg (without dust cover)
    Accessories: Dust cover, felt mat, turntable, counterweight, tonearm shell (AT-HS6), VM stereo pickup (AT-VM95E), 45 rpm adapter, stylus light, dust cover hinge, USB cable, (1.9 m), RCA audio cable (approx. 1.4 m), AC adapter (approx. 1.3 m) (AD-SA1230WD)
    Replacement stylus: AT-VMN95E (sold separately) separately)
    Replacement tonearm shell: AT-HS6 (sold separately)

    Specifications are subject to change without notice due to improvements.

    Read more

    The AT-LP120XUSB is a fully manual turntable that can play 33-1/3, 45 and 78 rpm records

    It is also equipped with a USB output, which makes it possible to connect the turntable to your computer.

    The built-in RIAA amplifier gives you the choice between PHONO and LINE
    PHONO is used if your amplifier has a PHONO input and the LINE mode should be used on devices where extra amplification of the signal is needed, such as active speakers or amplifiers with AUX input.

    The AT-LP120XUSB has a new direct-drive DC servo motor, which provides a more precise and consistent speed. Together with a dynamic, adjustable anti-skate control, S-shaped tonearm and the new AT-VM95E cartridge, you have the best conditions for a good sound reproduction.

    The tonearm is S-shaped with adjustable tracking force together with the new tonearm shell AT-HS6 and the new AT-VM95E cartridge. Audio-Technica has been a market leader in developing Phono cartridges for the past 50 years and it is noticeable in their latest high-performance AT-VM95E (elliptical stylus). The cartridge is compatible with all the replacement needles included in the AT-VM95 series, allowing for easy upgrading. Additional features include a cast aluminum plate with felt mat.

    - Experience the latest generation AT-LP120XUSB, designed in Tokyo, Japan
    - Direct drive, DC servo motor
    - Fully manual
    - Adjustable and dynamic anti-skating control
    - Choose between three speeds, 33/45/78 RPM
    - Convert vinyl records to digital files via the USB output
    - Professional anti-resonance through the cast aluminum platter
    - New tonearm shell AT-HS6 together with the new phono cartridge AT-VM95E
    - The built-in amplifier is switchable between PHONO and LINE
    - The AT-VM95E is compatible with all replacement needles from the AT-VM95 series for easy and convenient upgrade or replacement
    - A balanced S-shaped tonearm with hydraulic damping lift
    - Stroboscopic platter with speed indicators
    - Record your vinyl records to your computer using Audacity (or other similar software) recording software
    - Included accessories: detachable RCA output cable, 45 rpm adapter and detachable dust cover 

    Specifications
    Turntable specifications:
    Type: Fully automatic 3-speed turntable
    Motor: DC servo motor
    Drive method: Direct drive
    Speeds: 33-1/3 rpm, 45 rpm, 78 rpm
    Turntable platter: Die-cast aluminum
    Starting torque: >1.0 kgf.cm
    Braking system: Electronic brake
    Wave: <0.2% WRMS (33 rpm) at 3 kHz
    Signal-to-noise ratio: >50 dB
    Output levels
    "PHONO": 4 mV nominal at 1 kHz, 5 cm/sec
    "LINE (MM)": 240 mV nominal at 1 kHz, 5 cm/sec
    Phono Gain 3: 36 dB nominal, RIAA equalized

    Tone Arm Specifications:
    Type: Static Balanced S-Shaped Tone Arm
    Effective Length: 230.5 mm
    Overhang: 16 mm
    Maximum Track Error Angle: Less than 3°
    Needle Pressure Adjustment Range: 0 to 4 g
    Suitable Pickup Weight Range: 3.5 to 8.5 g

    Pickup and Tone Arm Shell Specifications:
    Pickup Model: AT-VM95E
    Pickup Type: VM
    Recommended Load Impedance: 47,000 Ohm
    Output voltage: 4.0 mV (1 kHz, 5 cm/sec)
    Stylus: 0.3 × 0.7 mils bonded elliptical stylus
    Stylus tube: Aluminum tube
    Stylus pressure range: 1.8 to 2.2 g (standard: 2.0 g)
    Pickup weight: 6.1 g
    Tone arm shell model: AT-HS6
    Tone arm shell weight: 9 g (incl. lead wires)
    Tone arm shell overhang adjustment: ±5 mm

    USB function:
    A/D, D/A: 16 bits 44.1 kHz or 48 kHz USB selectable
    Computer interface: USB 1.1 Compatible with Windows 7 or later, or Mac OS X or later

    General specifications:
    Power supply requirements: 100 to 240 V, 50/60 Hz, max. 1.5 A.
    Power consumption: 2.70 W
    AC adapter: 12 V, 3 A
    Dimensions: 452.0 mm × 352.0 mm × 141.6 mm (W x D x H)
    Weight: 8 kg (without dust cover)
    Accessories: Dust cover, felt mat, turntable, counterweight, tonearm shell (AT-HS6), VM stereo pickup (AT-VM95E), 45 rpm adapter, stylus light, dust cover hinge, USB cable, (1.9 m), RCA audio cable (approx. 1.4 m), AC adapter (approx. 1.3 m) (AD-SA1230WD)
    Replacement stylus: AT-VMN95E (sold separately) separately)
    Replacement tonearm shell: AT-HS6 (sold separately)

    Specifications are subject to change without notice due to improvements.

The shopping cart is full
Your shopping cart has reached the maximum number of order rows (250). To add more products, please complete your order and then make a new order.
Till kassan